Posted on

Cleaning hearing aids

There is quite a few ways on how to clean hearing aids . You should do the best way that works for you. I will tell you one way on how to clean them but I suggest to do one at a time so you don’t mix them up.

Where you can separate them from the hearing aid and the mould you will need to seprate each part of the hearing aid.
Then put the mould in water over night.
you can leave it over the day to dry but if you want to wear it that morning you can find something ton dry it with it could be anything .
it with and rejoin them.
then you can wear it clean

this is a link so you can get a countainer so you can clean your hearing aid

Posted on

at home do you need to wear hearing aids at home all the time ?

the answer is really your decision there are some benfits of wearing them at home and not wearing them at home

wear them at home:
people do not say turn it down to you all the times

not wearing them at home:
people say turn it down all the time

feel free to comment if you have any thing of advantage and disadvantage of wearing them or not wearing them at home

Posted on

wich way do you put the hearing aids in and also how to put it in your ears step by step and learning how to put them in yours ears

wich ear does the hearing aids go in:
grab the hearing aid were ever you put them now face the mould so the way you put it in now you look at the top it the end is faceing forward that means it is in the wrong ear

when you start with hearing aids it is a challenge to put it in so here is a step by step on how to put it in
step one : grab you hearing aid either side but make sure you got the right one for the ear you are going to put it in
step two : face the end of the tube that is not connected to anything face that to your ear
step three put the mould into your ear
step four : grab the top of the hearing aid
step five : place it on top of the ear
step six : make sure it will stay on

Posted on

what happens if the moter says waiting for pimary

the fm system on the top of the screen says phonak and on the bottom of the screen says roger at the bottom of the screen 8 buttons at the bottom

when it says waiting for pimary and you cant connect but it unmute and it will turn on but if you have already connect it wont work you will need to press the button with a line on it above it said end sud press that line button and it wont says waiting for primary anymore and it will work again

Posted on

how to use a air pump

when you use hearing aids they will get waxy so you need to clean them so this is how you use the air pump so you can use a old tooth brush and use it to clean you hearing aids so what happen when there is water in your hearing aid tube how you get it out is to use a air pump so here is how to use it

step one : take the top and bottom apart of the hearing aid

step two : grab and hold your air pump

step three : put the air pump a bit in your tube so it is in but not stuck in there

step four : squeeze the pump and do it multiple times until the tube is dry

step five : take the pump out of the tube

to get to know how to use this way of doing this way of cleaning your hearing aids

Posted on

if the bottom of the tube is stiff

after your tube has been in the mould for a while it will get stiff that means that you will need to change it some moulds you can just thread it on but some are really hard to get back in that will hopefully be on new tube in the mould so here is a way of putting a new tube on

you can get a threader for you to help you put a new tube in your mould

Posted on

do you have hearing aid and glasses and they are keep on falling off your ears so this is are tips to help them not fall off your ears

put the glasses fursthest away from your ears so the glasses are the one nearest to the your hearing aid or cochlear implant nearst to your ears so the glasses are covering you hearing aid or chochler implant but make sure it is still working what ever device you have to help you hear it might be different of how is fine with you

here is some hearing aid batties that you can buy to the hearing aid batties that you can buy

Posted on

if your recivers dont work

one way can solve them is to:

1. change your hearing aid batties if this does not work here is one way to do it

2. rub the end of the hearing aid and this one of the ways to solve it

3. the bit that looks complicated replace it is cheap the bit that touch the hearing aid the top bit

these are the ways to fix it